恩施附近有没有服务

Hello, welcome to Ningjin Shengda baler machinery factory!

Add to collection | About us | contact us | Website map

 Waste paper packer

National hotline thirteen billion one hundred and forty-five million three hundred and forty-four thousand and one hundred

Current location: Baler > news information >

Do you know how to use the plastic bottle packer?

Author: admin Release time: 16:19, July 10, 2020 Number of visits:

The plastic bottle packer, controlled by PLC microcomputer, is mainly used for the compression forming of waste paper boxes, plastic bottles and cans in large-scale recycling stations and paper mills. The waste paper packed with plastic bottle packer has the advantages of uniform size, large ratio, high density and small volume, which greatly reduces the space occupied by the can and reduces the space occupied by the can Storage and transportation costs. Some partners don't know how to use the plastic bottle packer. Let's talk about the operation steps of the plastic bottle packer

Precautions for installation of plastic bottle packer:
1. Put the machine flat without shaking, and then add 68 × 10 hydraulic oil, and add different weight oil according to different tonnage equipment.

2. Please check whether the local voltage is the same as that of the machine. After connecting the wire (the wire is connected according to the power of the motor), turn on the power to see the rotation direction of the motor (indicated by the arrow) clockwise. If the direction is not correct, adjust the connection position of two hot wires.

Maintenance of plastic bottle packing machine: the machine shall be operated and maintained by special personnel. After work every day, turn off the main power supply, clean up the foreign matters around the machine, clean up the foreign matters inside the machine, and add proper lubricating oil to the moving position to reduce the wear of the machine. Regularly check whether the screws in all parts of the machine are loose. The easy to loosen parts of the new machine are: small flange screws of the middle shaft and four 5 / 8 large screws in the pressure plate, which should be reinforced regularly.
 Plastic bottle packer

It is necessary to strictly abide by the rules of safe operation and maintenance of the machine, and strictly abide by the rules of safe operation and maintenance. Therefore, it is suggested that users should establish maintenance and safe operation procedures. Besides being familiar with the machine structure and operation procedures, operators should also pay attention to the following points:
(1) high quality anti-wear hydraulic oil shall be strictly used for the hydraulic oil added into the oil tank, which shall be strictly filtered, and sufficient oil quantity shall be kept regularly. When it is insufficient, the oil shall be filled immediately.
(2) the oil tank should be cleaned and replaced with new oil every half a year, but the filter oil should not be cleaned for more than one month. The new oil used once can be reused after strict filtration.
(3) lubricating oil shall be added at least once per shift at each lubricating place of the machine.
(4) the sundries in the material box should be cleaned up in time.
(5) do not start the machine without learning and understanding the machine structure, performance and operating procedures.
(6) in case of serious oil leakage or abnormal phenomenon in operation, the machine shall be stopped immediately to analyze the causes and eliminate the fault, and it is not allowed to operate with fault forcibly.
(7) during the operation of the machine, it is not allowed to repair or contact the moving parts, and it is forbidden to press materials in the material box with hands or feet.
(8) the adjustment of pump, valve and pressure gauge shall be carried out by experienced technicians. If the pressure gauge is found to be faulty, the gauge shall be checked or updated immediately.
(9) the user shall formulate detailed maintenance and safe operation procedures according to specific conditions.

Precautions for the safety and stability of plastic bottle packer: before packing, check whether the doors are closed properly, whether the door lock is in place, whether the knife shear buckle is buckled, and whether the safety chain is fastened on the handle. If any part is not fastened properly, do not pack it to avoid accidents. When the machine is in operation, people should stand beside the machine and do not put their heads, hands and other parts of the body into the door to avoid crushing.