恩施附近有没有服务

Hello, welcome to Ningjin Shengda baler machinery factory!

Add to collection | About us | contact us | Website map

 Waste paper packer

National hotline thirteen billion one hundred and forty-five million three hundred and forty-four thousand and one hundred

Current location: Baler > news information >

Where is the easy broken place of waste paper packer?

Author: admin Release time: July 23, 2020 11:48 Number of visits:

The electrical control part of the waste paper packer is mainly composed of PLC, motor, relay and switch electrical components. Among these parts, the motor and electrical components are easy to be damaged. Daily precautions for the electrical control box of the packaging machine are as follows:

 Waste paper packing machine

1. Pay attention to power line grounding, lightning protection, rain proof and moisture-proof.

2. The electric control cabinet is not allowed to be used by non professional operators.

3. Pay attention to the antifreeze work of the motor and the long-term overload of the motor. Effective prevention of these two items can greatly reduce the damage of the motor, so as to maintain the normal packing of the waste paper packer.

4. It is necessary to pay attention to the button operation of the console part, switch button should not be too strong, but also to prevent misoperation, so as to avoid damage caused by short circuit.

In order to prevent the faults easily occurred in the operation of the automatic waste paper packer, it is to further check the damage of the internal parts of the waste paper packer, and take out the damaged parts for repair or replacement. This helps to improve the efficiency and service life of the waste paper packer. Conducive to our better production and create profits!

Strictly abide by the correct disassembly and assembly method of waste paper packer, use proper disassembly tools correctly, avoid damaging the waste paper packer by violent knocking. It is strictly forbidden to use hammer to knock on the working surface of parts. If it is necessary to knock, copper or lead hammer can be used, or a soft cushion should be added between the work object and the vertical head. It is not allowed to use measuring tools and files instead of hammers, but to use blunderbuss and chisels instead of spanners. From the surface to the inside, from the assembly to the components and then to the parts, the disassembly shall be carried out step by step, and the inspection shall be carried out at the same time.

 Application range of waste paper packer

The disassembled parts of waste paper packer should be placed in wooden frame, wooden box or parts tray in order to prevent parts from being scattered, damaged or rusted due to moisture. To avoid confusion during assembly. The disassembly of the waste paper packer should be ready for the assembly of the packer, and check and mark the marks. Timing gear, crankshaft and flywheel, connecting rod and connecting rod cap, coupling parts processed in sets or selected, and other non interchangeable parts shall be marked according to the original position or sequence before disassembly, so as to avoid confusion during assembly. Parts shall be stored by category according to the size, degree and assembly of parts to avoid mixing or damage.

At present, the application of waste paper packer is more and more widely, and the production enterprises using waste paper packer are also increasing. In the process of using waste paper packer, many enterprises will encounter problems like this and that. Next, I will analyze the problem of pushing waste paper packer for you.

To check whether there are foreign bodies in the waste paper packer, and then check whether the screw is loose, which affects the normal transportation of the packing belt. The clearance of stripping must be strictly controlled, generally between 0.5-1.0 cm. Improper position of the conveyor belt will also cause the conveyor belt to break.