恩施附近有没有服务

Hello, welcome to Ningjin Shengda baler machinery factory!

Add to collection | About us | contact us | Website map

 Waste paper packer

National hotline thirteen billion one hundred and forty-five million three hundred and forty-four thousand and one hundred

Current location: Baler > news information >

How to design the internal oil tank of waste paper packer?

Author: admin Release time: July 23, 2020 11:59 Number of visits:

Gongyi Xinyang Machinery Co., Ltd. specializes in the production and sales of waste paper packer, metal baler, straw baler, horizontal waste paper packer and vertical waste paper packer, etc. with large output and high performance, it is the choice of new and old users

 Real shot of waste paper packer

How to design the internal oil tank of waste paper packer?

What's the main part of the big machine? What's the main function of the small machine

In addition to the main engine, conveyor, hopper for feeding, a hydraulic waste paper packer is composed of several other power systems. Its main features are good performance, simple operation, high cost performance and high safety performance. The waste paper packer not only has good rigidity, toughness and stability, but also has a beautiful and generous shape. It is not only easy to operate, but also quick to install, More importantly, such a device can better achieve energy conservation and environmental protection

As for the hardware facilities of the waste paper packer, we will not say much about its internal structure. Today, we will mainly talk about the structural design of the oil tank. Don't underestimate the small oil cylinder. Now most waste paper packers are hydraulic systems, so the oil cylinder plays a very important role in it. If you can't use or maintain it correctly, you should pay attention to the structure design of the oil tank, The whole set of waste paper packaging opportunities constitute a lot of unnecessary damage

 Waste paper packer details

In order to make the fuel tank on the waste paper packer work better and have a longer service life, great efforts are also made in the design. In order to prevent the internal oil pollution, we have more reasonable design of the fuel tank. We will synthesize the following points for attention

First, the distance between the oil suction pipe and the oil return pipe on the oil cylinder should be as far as possible. The two sides of the oil suction and oil return can be separated by the baffle plate to ensure the cleanness of the oil in the oil tank

Second, the filter should be installed at the inlet of the oil suction pipe. The filter can better avoid air bubbles when the hydraulic pump of waste paper packer inhales air or returns oil

Third, cover plate should be set on the oil tank of waste paper packer, and sealing rings should be added at each pipe orifice to ensure its sealing. Filter screen or filter should be added to oiler and vent

Fourth, the bottom of the oil tank should be kept above 150 mm with the ground, so as to better heat dissipation and facilitate the maintenance of the machine

5. The fuel tank is made of thickened steel plate. In some special places, corner plate or rib will be used to consolidate

 Application range of waste paper packer

Only by better ensuring the normal operation of the fuel tank can our waste paper packer be free from obstruction in the later use and operation. No matter how good things are, they also need maintenance, isn't it?