恩施附近有没有服务

Hello, welcome to Ningjin Shengda baler machinery factory!

Add to collection | About us | contact us | Website map

 Waste paper packer

National hotline thirteen billion one hundred and forty-five million three hundred and forty-four thousand and one hundred

Current location: Baler > news information >

How much is the plastic bottle packer?

Author: admin Release time: 2020-08-05 16:35 Number of visits:

Plastic bottle packing machine is mainly used in the packing and binding of cartons, wooden cases, paper packages and cloth packages in the industries of Commerce, post, railway, bank, food, medicine, books and periodicals, distribution, etc. The plastic packer adopts hydraulic transmission with reasonable design, compact structure and reliable hydraulic performance. It has the characteristics of high working efficiency, low energy consumption, simple installation and operation, reliable use, strong adaptability to working environment and low price.

1. Operation process of hydraulic baler (1) → the right top knife rises and stands against the right belt at the slide plate (2) → "t" guide plate retreats (3) → the belt withdrawal probe is sensed by the proximity switch (4) → the main motor stops and the brake is closed (5) → the belt is tightened and tied to the object (7) → the main motor is started for the second time, and the brake is pulled in (8) → the large swing rod is pulled twice Tighten the belt (9) → lift the left ejector body and press the lower belt (10) → the heating plate extends into the middle of the two belts (11) → the middle top knife rises and cuts off the belt (12) → the middle top knife descends (13) → the middle top knife rises again to make the two belts firmly adhere (14) → the middle top knife descends, and the left and right top knives drop at the same time (15) → the heating sheet is reset (16) → the slide plate moves backward (17) → "t" guide plate is reset (18) → the switch sense is close to The belt feeding probe (19) → the belt feeding motor is started to drive the belt feeding (20) → the large swing rod is reset, (21) → the belt is in place, and the top of the belt is on the "t" guide plate (22) → the proximity switch senses the double probe (23) → the main motor stops and the brake is applied.

 Real shot of plastic bottle packer

2. Features of hydraulic packer: ① all models are driven by hydraulic pressure and can be manufactured manually or automatically by PLC;

(2) there are different ways of discharging, such as turning the bag, pushing the bag (side pushing and forward pushing) or taking the bag manually (packing);

(3) installation does not need foot screw, where there is no power supply, diesel engine can be used as power supply;

From 4 tons to 40 tons / shift for customers to choose from 4 tons / shift;

(5) the size of compression chamber and package block can be customized according to customer requirements;.

 Application scope of plastic bottle packer

III. precautions for hydraulic baler: correct use of machine equipment, careful implementation of maintenance system and strict compliance with operating procedures are necessary conditions for prolonging machine service life, improving production efficiency and ensuring production. Therefore, it is suggested that users should establish maintenance and operation procedures. Besides being familiar with the machine structure and operation procedures, the following points should be paid attention to:

(1) high quality anti-wear hydraulic oil shall be strictly used for the hydraulic oil added into the oil tank, which shall be strictly filtered, and sufficient oil quantity shall be kept regularly. When it is insufficient, the oil shall be filled immediately.

(2) the oil tank should be cleaned and replaced with new oil every half a year, but the filter oil should not be cleaned for more than one month. The new oil used once is allowed to be reused after strict filtration.

(3) lubricating oil shall be added at least once per shift at each lubricating place of the machine.

(4) the sundries in the material box should be cleaned up in time.

(5) do not start the machine without learning and understanding the machine structure, performance and operating procedures.

(6) in case of serious oil leakage or abnormal phenomenon in the operation of the machine, the machine shall be stopped immediately to analyze the causes and eliminate the fault. It is not allowed to operate with fault by force.

(7) during the operation of the machine, it is not allowed to repair or contact the moving parts, and it is forbidden to press materials in the material box with hands or feet.

(8) the adjustment of pump, valve and pressure gauge shall be carried out by experienced technicians. If the pressure gauge is found to be faulty, the gauge shall be checked or updated immediately.

(9) users shall formulate detailed maintenance and operation procedures according to specific conditions